國內設備
設備,擁有多項
全國服務熱線:
0531-55555478
了解更多詳細信息,請致電
電話:0531-55555478
傳真:0531-88894779
郵箱:sdqyjnkj@163.com
Q Q: 506615608
或給我們留言
在線留言自動排水器在使用過程中,可能會出現電磁閥關閉不嚴的情況,表現為一直漏氣。通常,該故障并非排水器本身質量所致,其原因是冷凝水太臟,水中的微小固體顆粒物進入閥芯與護套之間的間隙,將閥芯卡住。
In the process of using the automatic drainer, the solenoid valve may not be closed tightly, which shows that there is always air leakage. Usually, the fault is not caused by the quality of the drain itself, the reason is that the condensate water is too dirty, and the small solid particles in the water enter the gap between the valve core and the sheath, and the valve core is stuck.
出現此故障可用如下方法排除:
This fault can be eliminated by the following methods:
1.反復多次按測試(TEST)按鈕直故障排除(此方法對輕微的閥芯卡住極為有效)。
1. Repeatedly press the test button until the fault is eliminated (this method is very effective for slight valve core sticking).
2.如以上方法不能奏效,則需拆開電磁閥,清洗閥芯:
2. If the above methods do not work, disassemble the solenoid valve and clean the valve core
(1)關閉過濾器,按測試(TEST)按鈕,確保電子自動排水器與空壓系統隔離(在零壓力下);
(1) Close the filter and press the test button to ensure that the electronic automatic drainer is isolated from the air pressure system (under zero pressure);
(2)切斷電子自動排水器電源;
(2) Cut off the power supply of the electronic automatic drainer;
(3)松開并取下連接線圈、控制器、接線頭的長螺釘;
(3) Loosen and remove the long screws connecting the coil, controller and connector;
3、按下列順序分解、清潔及反向組合:
3. Decompose, clean and reverse combination in the following order:
A:切斷排水器入口空氣;
A: Cut off the inlet air of the drainer;
B:松開減壓螺絲放氣;
B: Loosen the pressure reducing screw to release air;
C:確認排水器內無壓力卸下連接螺套;
C: Confirm that there is no pressure in the drainer and remove the connecting screw sleeve;
D:卸下粗濾網濾網固定螺母;
D: Remove the fixing nut of coarse filter screen;
E:反時針旋下排水導管、水杯、浮球、排水導管分解并取下細濾網;
E: Turn the drain pipe, water cup, floating ball and drain pipe anticlockwise to disassemble and remove the fine filter screen;
F:卸下控制桿取出閥及浮子;
F: Remove the control rod, take out the valve and float;
G:用雙手各握腔體與排水管小心往90度角用力使其分開,取出彈簧和精濾網及泄氣薄片;
G: Hold the cavity and drain pipe with both hands, carefully separate them at a 90 degree angle, and take out the spring, fine filter screen and vent sheet;
H:用中性洗劑徹底污漬,按相反次序組合正常使用。
H: Use neutral lotion to remove stains completely, and use them in reverse order.
以上就是小編為大家介紹的關于 自動排水器的日常維護的解決方法,希望可以幫助到您,更多的精彩內容關注我們!
The above is Xiaobian for you to introduce the solution of the daily maintenance of automatic drainer, hope to help you, more wonderful content, pay attention to us!
上一篇:自動排水器出現積水的三種解決方法
下一篇:影響沸騰干燥機干燥效果的四個因素及設備特點